User manual

7. Click Next to display the following screen.

8. After clicking Save/Reboot, the router will save the configuration to the flash

memory, and reboot. The Web UI will not respond until the system is brought up

again. After the system is up, the Web UI will refresh to the Device Info page

automatically. The CT-5624 is ready for operation and the LEDs display as

described in the LED description tables.

6.2.4 Bridging

Select the bridging mode. To configure Bridging, do the following.

1. Select Quick Setup and click Next.

2. Enter the PVC Index and click Next.

3. Type in the VPI and VCI values provided by the ISP and click Next.

4. Select the Bridging radio button and click Next. The following screen

appears. To use the bridge service, tick the checkbox, Enable Bridge Service,

and enter the service name.

- -