User manual

5. Upon completion, click Next. The following screen appears.

The Device Setup page allows the user to configure the LAN interface IP address

and DHCP server. If the user would like this ADSL router to assign dynamic IP

addresses, DNS server and default gateway to other LAN devices, select the radio

box Enable DHCP server and enter the Start and End IP address and the DHCP

Leased Time. This configures the router to automatically assign IP addresses,

default gateway address and DNS server addresses to each of your PCs.

6. After entering your settings, select Next to display the following screen. The

WAN Setup-Summary screen presents the entire configuration summary. Click

Save/Reboot if the settings are correct. Click Back if you wish to modify the

settings.

- -