User manual

5. After clicking Save/Reboot, the router will save the configuration to the flash

memory, and reboot. The Web UI will not respond until the system is brought up

again. After the system is up, the Web UI will refresh to the Device Info page

automatically. The CT-5624 is ready for operation and the LEDs display as

described in the LED description tables.

6.2.2 MAC Encapsulation Routing (MER)

To configure MER, do the following.

1. Select Quick Setup and click Next.

2. Enter the PVC Index provided by the ISP and click Next.

3. Select the MAC Encapsulation Routing (MER) radio button, and click Next. The

following screen appears.

Enter information provided to you by your ISP to configure the WAN IP settings.

NOTE: DHCP can be enabled for PVC in MER mode if Obtain an IP address

automatically is chosen. Changing the default gateway or the DNS

effects the whole system. Configuring them with static values will

disable the automatic assignment from DHCP or other WAN connection.

For static default gateway you must enter the IP address in the “Use IP

address” field. The “Use WAN interface” field is optional. The ISP

should provide this information to you.

- -