User manual

6.2.1 PPP over ATM (PPPoA) and PPP over Ethernet (PPPoE)
1. Select the PPP over ATM (PPPoA) or PPP over Ethernet (PPPoE)
radio button and click Next. The following screen appears:
PPP Username/PPP Password
Give “PPP Username”, “PPP Password” and “PPPoE Service Name”, then select the
“Authentication Method” (AUTO/PAP/CHAP/MSCHAP). Please contact your ISP for
the information. The WEB user interface allows a maximum of 256 characters in
the PPP user name and a maximum of 32 characters in PPP password.
PPPoE service name
For PPPoE service, PADI requests contain a service name-tag. Some PPPoE
servers (or BRAS) of ISP check this service name-tag for connection.
Encapsulation Mode
Choosing different connection types provides different encapsulation modes.
•
•
•
•
•
PPPoA- VC/MUX, LLC/ENCAPSULATION
PPPoE- LLC/SNAP BRIDGING, VC/MUX
MER- LLC/SNAP-BRIDGING, VC/MUX
IPoA- LLC/SNAP-ROUTING, VC MUX
Bridging- LLC/SNAP-BRIDGING, VC/MUX
Disconnect if no activity
The CT-5624 can be configured to disconnect if there is no activity for a period of
time by selecting the Dial on demand check box. When the checkbox is ticked,
you need to enter the inactivity timeout period. The timeout period ranges from
1 minute to 4320 minutes.
- -
24