User manual

6.2 Manual Quick Setup
STEP 1: Click Quick Setup and un-tick the DSL Auto-connect checkbox to
enable manual configuration of the connection type.
Un-tick this checkbox to enable manual
setup and display the following screen.
STEP 2: Enter the Virtual Path Identifier (VPI) and Virtual Channel Identifier
(VCI). Select Enable Quality Of Service if required. Enabling IP QoS for
a PVC improves performance for selected classes of applications.
However, since IP QoS also consumes system resources, the number of
PVCs will be reduced consequently. Use Advanced Setup/Quality of
Service to assign priorities for the applications. Click Next.
STEP 3: Choosing different connection types pops up different settings requests.
Enter appropriate settings that are requested by your service provider.
The following descriptions state each connection type setup separately.
Select Enable 802.1q (by ticking the box) if required, and input a
number for the VLAN ID. Click Next to go to the next step.
- -
23