User`s manual

6.4 Security
To display this function, you must enable the firewall feature in WAN Setup. For
detailed descriptions with examples please consult Appendix D: Security
6.4.1 IP Filtering
IP filtering allows you to create a filter rule to identify outgoing/incoming IP traffic
by specifying a new filter name and at least one condition below. All of the
specified conditions in this filter rule must be satisfied for the rule to take effect.
Click 'Save/Apply' to save and activate the filter.
OUTGOING IP FILTER
To add a filtering rule, click the Add button on the screen below.
NOTE: The default setting for Outgoing is Accepted.
49