User`s manual

5.1 WAN
Click Device Info on the menu bar to display the WAN option. Then, click WAN
on the Device Info menu bar to display the configured PVC(s) and the status.
Heading Description
VPI/VCI Shows the values of the ATM VPI/VCI
Con. ID Shows the connection ID
Category Shows the ATM service classes
Service Shows the name for WAN connection
Interface Shows connection interfaces
Protocol Shows the connection type, such as PPPoE, PPPoA, etc.
IGMP Shows the statue of the IGMP function
QoS Shows if QoS is enabled or disabled
State Shows the connection state of the WAN connection
Status Lists the status of DSL link
IP Address Shows IP address for WAN interface
5.2 Statistics
Selection of the Statistics screen provides statistics for the Network Interface of
LAN, WAN, ATM and ADSL. All statistics screens are updated every 15 seconds.
5.2.1 LAN Statistics
The Network Statistics screen shows interface statistics for Ethernet and USB
interfaces. (The Network Statistics screen shows interface statistics for LAN of
Ethernet and USB interfaces. This shows byte transfer, packet transfer, Error and
Drop statistics for the LAN interface.)
35