User`s manual

Step 5: After clicking Save/Reboot, the router will save the configuration to

the flash memory, and reboot. The Web UI will not respond until the

system is brought up again. After the system is up, the Web UI will

refresh to the Device Info screen automatically. The CT-5611TC is

ready for operation and the LEDs display as described in the LED

description tables.

4.2.3 IP Over ATM

Step 1: Enter the WAN IP settings as directed by your ISP.

NOTE: DHCP is not supported over IPoA. The user must enter the IP address

or WAN interface for the default gateway setup and the DNS server

addresses as directed by their ISP.