User`s manual

STEP 4: Choosing different connection types pops up different encapsulation.
Enter appropriate settings as requested by your service provider. The
following descriptions state each connection type setup separately.
Select Enable 802.1q (by ticking the box) if required, and input a
number for the VLAN ID. Click on Next to go to next step.
4.2.1 PPP over ATM (PPPoA) and PPP over Ethernet (PPPoE)
Step 1: Select the PPP over ATM (PPPoA) or PPP over Ethernet (PPPoE)
radio button and click Next. The following screen appears:
22