User`s manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Installation
- Chapter 3 Login via the Web Browser
- Chapter 4 Quick Setup
- Chapter 5 Quick Setup
- Chapter 6 Advanced Setup
- Chapter 7 Wireless
- Chapter 8 Diagnostics
- Chapter 9 Management
- Appendix A: Printer Server Configuration
- Appendix B: Firewall
- Appendix C: Pin Assignments
- Appendix D: Specifications
- Appendix E: SSH Client
To create a group from the list, first enter the group name and then select from the
available interfaces on the list.
Automatically Add Clients With the Following DHCP Vendor IDs:
Add support to automatically map LAN interfaces including Wireless and USB to
PVC's using DHCP vendor ID (option 60). The local DHCP server will decline and
send the requests to a remote DHCP server by mapping the appropriate LAN
interface. This will be turned on when PortMapping is enabled.
In this example there are 4 PVCs (0/33, 0/36, 0/37, 0/38). 0/33 is for PPPoE and the
others are for IP setup-box (video).
The Lan interfaces are ETH1, ETH2, ETH3, ETH4, Wireless and USB.
Port mapping configuration are:
1. Default : ENET1, ENET2, ENET3, ENET4, Wireless, Wireless_Guest and USB.
2. Video: nas_0_36, nas_0_37 and nas_0_38. The DHCP vendor ID is "Video".
80