User`s manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Installation
- Chapter 3 Login via the Web Browser
- Chapter 4 Quick Setup
- Chapter 5 Quick Setup
- Chapter 6 Advanced Setup
- Chapter 7 Wireless
- Chapter 8 Diagnostics
- Chapter 9 Management
- Appendix A: Printer Server Configuration
- Appendix B: Firewall
- Appendix C: Pin Assignments
- Appendix D: Specifications
- Appendix E: SSH Client
For further information on WAN, please reference section: 4.1, Page 19.
6.2 LAN
Configure the DSL Router IP Address and Subnet Mask for LAN interface. Save
button only saves the LAN configuration data. Save/Reboot button saves the LAN
configuration data and reboots the router to make the new configuration effective.
IP Address: Enter the IP address for the LAN port.
Subnet Mask: Enter the subnet mask for the LAN port.
Enable IGMP Snooping: Enable IGMP Snooping function by ticking the box.
Standard Mode: In standard mode, as in all prior releases, multicast traffic will
flood to all bridge ports when there is no client subscribes to any multicast group –
even when IGMP snooping is enabled.
Blocking Mode: In blocking mode, the multicast data traffic will be blocked and not
flood to all bridge ports when there is no client subscription to any multicast group.
53