User`s manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Installation
- Chapter 3 Login via the Web Browser
- Chapter 4 Quick Setup
- Chapter 5 Quick Setup
- Chapter 6 Advanced Setup
- Chapter 7 Wireless
- Chapter 8 Diagnostics
- Chapter 9 Management
- Appendix A: Printer Server Configuration
- Appendix B: Firewall
- Appendix C: Pin Assignments
- Appendix D: Specifications
- Appendix E: SSH Client
9.1.3 Restore Default
Clicking the Restore Default Configuration option in the Restore Settings screen can
restore the original factory installed settings.
NOTE: This entry has the same effect as the hardware reset-to-default button.
The CT-5372E board hardware and the boot loader support the reset to default
button. If the reset button is continuously pushed for more than 5 seconds, the
boot loader will erase the entire configuration data saved on the flash memory.
NOTE: Restoring system settings requires a system reboot. This necessitates that
the current Web UI session be closed and restarted. Before restarting the
connected PC must be configured with a static IP address in the 192.168.1.x subnet
in order to configure the CT-5372E.
104