User manual

53
DHCP Server Relay: Enable with checkbox and enter DHCP Server IP address.
This allows the Router to relay the DHCP packets to the
remote DHCP server. The remote DHCP server will provide
the IP address.
This option is hidden if NAT is enabled
2
ND
LAN INTERFACE
To configure a secondary IP address, tick the checkbox  outlined (in RED) below.
IP Address: Enter the secondary IP address for the LAN port.
Subnet Mask: Enter the secondary subnet mask for the LAN port.
NOTE: The Save button saves new settings to allow continued configuration
while the Save/Reboot button not only saves new settings but also
reboots the device to apply the new configuration (i.e. all new settings).
Ethernet Media Type: Select from Auto, 10_Half, 10_Full, 100_Half or 100_Full
for each Ethernet port.