User manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Installation
- Chapter 3 Web User Interface
- Chapter 4 Quick Setup
- Chapter 5 Device Information
- Chapter 6 Advanced Setup
- Chapter 7 Wireless
- Chapter 8 Diagnostics
- Chapter 9 Management
25
4.2.2 MAC Encapsulation Routing (MER)
Step 4: Select the MAC Encapsulation Routing (MER) radio button and click Next.
Enter information provided to you by your ISP to configure the WAN IP settings.
NOTE: DHCP can be enabled for PVC in MER mode if Obtain an IP address
automatically is chosen. Changing the default gateway or the DNS
affects the whole system. Configuring them with static values will disable
the automatic assignment from DHCP or other WAN connection.
If you configure static default gateway over this PVC in MER mode, you
must enter the IP address of the remote gateway in the “Use IP address”
field. Your ISP should provide the values to be entered in these fields.
Step 5: Click Next to display the following screen.