User manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Installation
- Chapter 3 Web User Interface
- Chapter 4 Quick Setup
- Chapter 5 Device Information
- Chapter 6 Advanced Setup
- Chapter 7 Wireless
- Chapter 8 Diagnostics
- Chapter 9 Management

103
Option Description
Inform Disable/Enable TR-069 client on the CPE.
Inform Interval The duration in seconds of the interval for which the CPE MUST
attempt to connect with the ACS and call the Inform method.
ACS URL URL for the CPE to connect to the ACS using the CPE WAN
Management Protocol. This parameter MUST be in the form of a
valid HTTP or HTTPS URL. An HTTPS URL indicates that the ACS
supports SSL. The “host” portion of this URL is used by the CPE
for validating the certificate from the ACS when using
certificate-based authentication.
ACS User Name Username used to authenticate the CPE when making a
connection to the ACS using the CPE WAN Management
Protocol. This username is used only for HTTP-based
authentication of the CPE.
ACS Password Password used to authenticate the CPE when making a
connection to the ACS using the CPE WAN Management
Protocol. This password is used only for HTTP-based
authentication of the CPE.
Display SOAP
messages on
serial console
Enable/Disable SOAP messages on serial console. This option is
used for advanced troubleshooting of the device.
Connection Request
Authorization
Tick the checkbox to enable.
User Name Username used to authenticate an ACS making a Connection
Request to the CPE.
Password Password used to authenticate an ACS making a Connection
Request to the CPE.
The Get RPC Methods button forces the CPE to establish an immediate connection
to the ACS. This may be used to discover the set of methods supported by the ACS
or CPE. This list may include both standard TR-069 methods (those defined in this
specification or a subsequent version) and vendor-specific methods. The receiver of
the response MUST ignore any unrecognized methods.