User`s manual

8.1.3 Restore Default

Clicking the Restore Default Configuration option in the Restore Settings screen can

restore the original factory installed settings.

NOTE: This entry has the same effect as the hardware reset-to-default button.

The CT-5611T board hardware and the boot loader support the reset to default

button. If the reset button is continuously pushed for more than 5 seconds, the

boot loader will erase the entire configuration data saved on the flash memory.

NOTE: Restoring system settings, requires a system reboot. This necessitates

that the current Web UI session be closed and restarted. Before restarting, the

connected PC must be configured with a static IP address in the 192.168.1.x

subnet in order to configure the CT-5611T.

Default settings

The CT-5611T default settings are

z LAN port IP= 192.168.1.1, subnet mask = 255.255.255.0

z Local user name: root

z Password: 12345

z Remote user name: support

z Remote user password: support

After the Restore Default Configuration button is selected, the following screen

appears. Close the DSL Router Configuration window and wait for 2 minutes before

reopening your web browser. If necessary, reconfigure your PC's IP address to match

your new configuration.