User`s manual

1. Default : ENET and USB.

2. Video: nas_0_36, nas_0_37 and nas_0_38. The DHCP vendor ID is "Video".

The CPE's dhcp server is running on "Default". And ISP's dhcp server is running on PVC

0/36. It is for setup-box use only.

In the LAN side, PC can get IP address from CPE's dhcp server and access Internet via

PPPoE (0/33).

If the setup-box was connected with interface "ENET" and send a dhcp request with

vendor id "Video", CPE's dhcp server will forward this request to ISP's dhcp server.

And CPE will change the port mapping configuration automatically. The portmapping

configuration will become:

1. Default : ENET and USB.

2. Video: nas_0_36, nas_0_37, nas_0_38 and ENET.