User`s manual

Traffic Class Name Enter name for traffic class

Assign ATM Transmit Priority Select Low, Medium or High.

Mark IP Precedence Select between 1-7. The lower the digit

shows the higher the priority

Mark IP Type Of Service Select either: Normal Service, Minimize Cost,

Maximize Reliability, Maximize Throughput,

Minimize Delay

Mark 802.1p if 802.1q is enabled

on WAN

Select between 1-7. The lower the digit

shows the higher the priority

Physical LAN Port User can select from: ENET, ENET(1-4), USB

or Wireless.

Protocol User can select from: TCP, TCP/UDP, UDP or

ICMP.

Source IP Address Enter the source IP address.

Source Subnet Mask Enter the subnet mask for the source IP

address.

UDP/TCP Source Port (port or

port:port)

Enter source port number.

Destination IP address Enter destination IP address.

Destination Subnet Mask Enter destination subnet mask.

UDP/TCP Destination port (port or

port:port)

Enter destination port number.

802.1p Priority Select between 0-7. The lower the digit

shows the higher the priority