User manual

Appendix G - 3G USB Dongle

Follow these steps to configure your Bandluxe C270 or O2 Huawei E160 USB dongle.

NOTE: These screens become available when the USB dongle is plugged in.

STEP 1: Plug the USB Dongle into the USB Host port.

STEP 2: Turn on the CT-5364A and login to the Web User Interface.

STEP 3: If your 3G USB Dongle has a protected SIM card, go to Advanced Setup

Æ PIN Configuration and enter the PIN code to unlock the SIM card.

After unlocking the SIM card, PIN Code Protection can be enabled or disabled.

Please reference the figure and table below for further instructions.

NOTE: The PIN code cannot be changed when PIN Code Protection is enabled.