User manual

69
6.5 Advanced
The Advanced screen allows you to configure advanced features of the wireless LAN
interface. You can select a particular channel on which to operate, force the
transmission rate to a particular speed, set the fragmentation threshold, set the RTS
threshold, set the wakeup interval for clients in power-save mode, set the beacon
interval for the access point, set XPress mode and set whether short or long
preambles are used. Click Save/Apply to set new advanced wireless options.
Field Description
Band Set to 2.4 GHz for compatibility with IEEE 802.11x standards.
The new amendment allows IEEE 802.11n units to fall back to
slower speeds so that legacy IEEE 802.11x devices can coexist
in the same network. IEEE 802.11g creates data-rate parity at
2.4 GHz with the IEEE 802.11a standard, which has a 54 Mbps
rate at 5 GHz. (IEEE 802.11a has other differences compared
to IEEE 802.11b or g, such as offering more channels.)
Channel Drop-down menu that allows selection of a specific channel.
Auto Channel
Timer (min)
Auto channel scan timer in minutes (0 to disable)
802.11n/EWC An equipment interoperability standard setting based on IEEE
802.11n Draft 2.0 and Enhanced Wireless Consortium (EWC)
Bandwidth Select 20GHz or 40GHz bandwidth. 40GHz bandwidth uses two
adjacent 20GHz bands for increased data throughput.
Control Sideband Select Upper or Lower sideband when in 40GHz mode.