User manual

Field Description

Mark Differentiated

Services Code Point

(DSCP)

The selected Code Point gives the corresponding priority to

packets that satisfy the rule.

Mark 802.1p Priority Select between 0-7. Lower values have higher priority.

Tag VLAN ID Enter a 802.1Q VLAN ID tag [2-4094]

Set Rate Control The data transmission rate limit in kbps.

5.8 Routing

This option controls Default Gateway, Static Route, Policy Routing and RIP.

NOTE: In bridge mode, the RIP screen is hidden while the other configuration

screens are shown but ineffective.

5.8.1 Default Gateway

Select a WAN Interface as the default gateway and click Save/Apply.

NOTE: After enabling the Automatic Assigned Default Gateway, the device must

be rebooted to activate the assigned default gateway.