User manual

27
5.2 WAN
This screen allows for the configuration of WAN interfaces.
Click the Add button to create a new connection. For connections on ATM or ETH
WAN interfaces see Appendix H. 3G setup instructions are provided in Appendix G.
NOTE: ETH and ATM service connections cannot coexist. In Default Mode, up to
8 WAN connections can be configured; while VLAN Mux and MSC
Connection Modes support up to 16 WAN connections.
To remove a connection, select its Remove column radio button and click Remove.
Heading Description
Interface Name of the interface for WAN
Description Name of the WAN connection
Type Shows the connection type
Vlan8021p VLAN ID used for VLAN Tagging (IEEE 802.1p)
VlanMuxId Shows 802.1Q VLAN ID
ConnId WAN connection ID number
IGMP Shows Internet Group Management Protocol (IGMP) status
NAT Shows Network Address Translation (NAT) status
Firewall Shows the status of Firewall
Remove Select items for removal
5.3 LAN
Configure local area network (LAN) settings here.