User manual

120
ENABLE PPP DEBUG MODE
When this option is selected, the system will put more PPP connection information
into the system log. This is for debugging errors and not for normal usage.
BRIDGE PPPOE FRAMES BETWEEN WAN AND LOCAL PORTS
When Enabled, this creates local PPPoE connections to the WAN side. Enable this
option only if all LAN-side devices are running PPPoE clients, otherwise disable it.
The CT-5364A supports pass-through PPPoE sessions from the LAN side while
simultaneously running a PPPoE client from non-PPPoE LAN devices
ENABLE IGMP MULTICAST
Tick the checkbox ; to enable Internet Group Membership Protocol (IGMP)
multicast. IGMP is a protocol used by IP hosts to report their multicast group
memberships to any neighboring multicast routers.
STEP 3: Select a WAN interface as the preferred default gateway route.
Click Next to continue or click Back to return to the previous step.
STEP 4: Select a WAN interface or enter a static IP address to the DNS Server.