User manual

114
There are many settings that must be configured here: VPI/VCI, DSL Link Type,
Encapsulation Mode, Service Category, Connection Mode and Quality of Service.
NOTE: Connection Mode determines the number of WAN connections available.
The table below shows DSL Link Type availability for each Connection Mode.
DSL Link Type
Connection Mode EoA* PPPoA IPoA
Default Mode OK OK OK
VLAN Mux Mode OK X X
MSC Mode OK X X
* EoA includes PPPoE, IPoE, and Bridge link types.
Here are the available encapsulations for each DSL link type:
 PPPoA- VC/MUX, LLC/ENCAPSULATION
 PPPoE- LLC/SNAP BRIDGING, VC/MUX
 MER- LLC/SNAP-BRIDGING, VC/MUX
 IPoA- LLC/SNAP-ROUTING, VC MUX
 Bridging- LLC/SNAP-BRIDGING, VC/MUX
STEP 3: Click Apply/Save to confirm your choices.
On the next screen, check that the ATM interface is added to the list.
For example, an ATM interface on PVC 0/35 (VPI/VCI) in Default Connection Mode
with an EoA Link type is shown below.