User manual

106
Parameter Description
SIM Info 1) READY
2) SIM PIN: waiting for PIN code
3) SIM PUK: waiting for PUK code
4) SIM not inserted
3G Backup Enabled or Disabled; see STEP 16: 3G Backup Function.
Backup Interface Displays 3G Backup WAN Interface
or “None” if 3G Backup is Disabled.
STEP 16: 3G Backup Function
The 3G Backup function enables the 3G service to act as a backup to an ATM
connection. If the ATM service loses its connection, the CT-5364A will enable and
switch traffic to the 3G connection. To enable this function, there must be an ATM
connection to monitor and it must be configured as the default gateway.
Assuming these conditions are met, go to the Advanced Setup Æ Backup screen.
Select the Enable 3G Backup checkbox ; , enter related parameters, and click
Save/Apply. Descriptions of these parameters are provided in the table below.
Parameter Description
Check Interval (X) PING test every X seconds
Retry time (Y) PING Y times each test
IP address IP address to PING
Selected WAN Interface The wan interface to be monitored