User manual

78
Chapter 8 Diagnostics
The Diagnostics menu provides feedback on the connection status of the device.
The individual tests are listed below. If a test displays a fail status, click Rerun
Diagnostic Tests at the bottom of the screen to retest and confirm the error. If
the test continues to fail, click Help and follow the troubleshooting procedures.
The basic test set (no PVC configured) is described in the table below. For help with
the other tests click on the Help
link next to the test condition for guidance
Test Description
ENET
Connection
Pass: Indicates that the CT-5361T has detected the Ethernet
interface on your computer.
Fail: Indicates that the CT-5361T does not detect the Ethernet
interface on your computer.
USB connection Pass: Indicates that the CT-5361T has detected the USB
interface on your computer.
Down: Indicates that the CT-5361T does not detect the USB
interface on your computer.
Wireless
connection
Pass: Indicates that the CT-5361T has detected the Wireless
interface on your computer.
Down: Indicates that the CT-5361T does not detect the Wireless
interface on your computer.
ADSL
Synchronization
Pass: Indicates that the CT-5361T has detected a DSL signal
from the telephone company.
Fail: Indicates that the CT-5361T does not detect a DSL signal
from the telephone company.
Diagnostics screens for various connection types are provided below.