User manual

2.3 USB Driver Manual Installation (64bit OS)

Before connecting this router to a PC with USB, the correct drivers must be installed.

STEP 1: Connect the USB port to the PC by plugging the flat connector of a

standard USB cable into your PC and plugging the square connector into

the device. After a moment, the connection should be detected by your

PC and if so, the screen will display a notice to that effect, as shown

below:

STEP 2: When the window displays as below, select Install from a list or

specific location (Advanced), and then click the Next button.

Follow the procedure below to manually install the 64-bit USB driver