User manual

9.8 Save and Reboot

This function saves the current configuration settings and reboots the device.

NOTE: You may need to reconfigure the TCP/IP settings after rebooting. For

example, if the DHCP server is disabled Static IP settings must be

configured. See section 3.2 IP Configuration for detailed instructions.

NOTE: If you lose all access to the web user interface (WUI), you may need to

close the browser, wait for two minutes, and then restart the WUI.

If this does not work, then press the reset button on the rear panel of the

device for 5-7 seconds to restore to default settings.