User manual

88
9.5 Internet Time
The Internet Time option under the Management submenu configures the time
settings of the device. To automatically synchronize with Internet timeservers, tick
the corresponding box displayed on this screen shown below.
First NTP timeserver: Select the required server.
Second NTP timeserver: Select second timeserver, if required.
Time zone offset: Select the local time zone.
Configure these options and then click Save/Apply to activate.
NOTE: Internet Time must be activated to use Parental Control (page 50).
In addition, this menu item is not displayed when in bridge mode since the
router would not be able to connect to the NTP timeserver.
9.6 Access Control
The Access Control option under the Management menu bar configures access
related parameters in three areas: Services, IP Addresses, and Passwords. Use
Access Control to control local and remote management settings for the device.
9.6.1 Services
The Services option limits or opens the access services over the LAN or WAN. These
access services are available: FTP, HTTP, ICMP, SNMP, SSH, TELNET and TFTP.
Enable a service by ticking its checkbox. Click Save/Apply to activate.