User manual

87
9.4 TR-069 Client
WAN Management Protocol (TR-069) allows an Auto-Configuration Server (ACS) to
perform auto-configuration, provision, collection, and diagnostics to this router.
Option Description
Inform Disable/Enable TR-069 client on the CPE.
Inform
Interval
The duration in seconds of the interval for which the CPE MUST
attempt to connect with the ACS and call the Inform method.
ACS URL URL for the CPE to connect to the ACS using the CPE WAN
Management Protocol. This parameter MUST be in the form of a valid
HTTP or HTTPS URL. An HTTPS URL indicates that the ACS supports
SSL. The “host” portion of this URL is used by the CPE for validating
the certificate from the ACS when using certificate-based
authentication.
ACS User
Name
Username used to authenticate the CPE when making a connection to
the ACS using the CPE WAN Management Protocol. This username is
used only for HTTP-based authentication of the CPE.
ACS
Password
Password used to authenticate the CPE when making a connection to
the ACS using the CPE WAN Management Protocol. This password is
used only for HTTP-based authentication of the CPE.
Connection Request
User Name Username used to authenticate an ACS making a Connection
Request to the CPE.
Password Password used to authenticate an ACS making a Connection
Request to the CPE.
The Get RPC Methods button forces the CPE to establish an immediate connection
to the ACS. This may be used to discover the set of methods supported by the ACS
or CPE. This list may include both standard TR-069 methods (those defined in this
specification or a subsequent version) and vendor-specific methods. The receiver of
the response MUST ignore any unrecognized methods.