User manual

81
Test Condition
ENET Connection Pass: Indicates that the Ethernet interface on your
computer is connected to the LAN port of this device.
Fail: Indicates that the device does not detect the
Ethernet interface on your computer.
Wireless connection Pass: Indicates the wireless card on the device is ON.
Down: Indicates that the wireless card is OFF.
ADSL Synchronization Pass: Indicates that the DSL modem has detected a DSL
signal from the telephone company. A solid ADSL LED on
the device also indicates the detection of a DSL signal
from the telephone company
Fail: Indicates that the DSL modem does not detect a
signal from the telephone company’s DSL network. The
ADSL LED will turn off.
Ping Default Gateway Pass: Indicates that the device can communicate with
the first entry point to the network. It is usually the IP
address of the ISP local router.
Fail: Indicates that the device was unable to
communicate with the first entry point on the network.
It may not have an effect on your Internet connectivity.
Therefore, if this test fails but you are still able to access
the Internet, there is no need to troubleshoot this issue.
Ping Primary Domain
Name Server
Pass: Indicates that the device can communicate with
the primary Domain Name Server (DNS).
Fail: Indicates that the device was unable to
communicate with the primary Domain Name Server
(DNS). It may not have an effect on your Internet
connectivity. Therefore, if this test fails but you are still
able to access the Internet, there is no need to
troubleshoot this issue.
NOTE: This table describes the basic test set (i.e. no PVC configured). For help
with other tests click on the Help
link next to each test condition.