User manual

7.3 MAC Filter

This option allows access to the router to be restricted based upon MAC addresses.

Every network device has a unique 48-bit MAC address. When MAC address filtering

is enabled, it restricts the devices that can connect to your access point.

To add a MAC Address filter, click the Add button shown below.

To delete a filter, select it from the table below and click the Remove button.

Enter the MAC address on the screen below and click Save/Apply.

Option Description

MAC

Restrict

Mode

Off – Disables MAC filtering

Allow – Permits access for the specified MAC addresses

Deny – Rejects access for the specified MAC addresses

MAC

Address

Lists the MAC addresses subject to the MAC Restrict Mode. The Add

button prompts an entry field that requires you type in a MAC address in

a two-character, 6-byte convention: xx:xx:xx:xx:xx:xx where xx are

hexadecimal numbers. A maximum of 60 MAC addresses can be added.