User manual

72
IIb. WPS – PIN CONFIGURATION
Using this method, a client is configured by the router AP using a personal
identification number (PIN). The PIN can be found on the device itself or within the
client software. The PIN may be generated randomly in the latter case. To obtain a
PIN number for your client, check device documentation for specific instructions.
The WPS PIN configuration is described in the procedure below. It is assumed that
the Wireless function is Enabled and that the router is configured as the Wireless
Access Point (AP) of your wireless LAN. In addition, the wireless client must also be
configured correctly and turned on, with WPS function enabled.
NOTE: The wireless AP on the router will search for WPS clients for 2 minutes. If
the router stops searching before you complete Step 5, then return to
Step 4 and try again.
Step 4: Select the PIN radio button in the WSC Add Client section of the Wireless
Security screen. Enter the client PIN in the box provided and click Add.
Step 4: Go to your WPS certified client device and activate the PIN function. A
screenshot of typical WPS client software is given below as an example.
You can now proceed to Step 6 to check your connection.