User manual

6.6 Routing

This option allows for Default Gateway, Static Route, and RIP configuration.

NOTE: In bridge mode, the RIP screen is hidden while the Default Gateway and

Static Route configuration screens are shown but ineffective.

6.6.1 Default Gateway

If the Enable Automatic Assigned Default Gateway checkbox is selected, this

device will accept the first received default gateway assignment from one of the

enabled PVC(s). If the checkbox is not selected, enter the static default gateway

and/or WAN interface. Click Save/Apply button to save it.

NOTE: After enabling the Automatic Assigned Default Gateway, the device must

be rebooted to activate the assigned default gateway.