User manual

Source MAC Address Defines the source MAC address

Frame Direction Select the incoming/outgoing packet interface

WAN Interfaces Applies filter to selected PVCs (bridge mode only).

Filter rules are arranged according to PVC, as shown

under the VPI/VCI heading on the previous screen.

6.4.2 IP Filtering

This screen sets filter rules that limit IP traffic (Outgoing/Incoming). Multiple filter

rules can be set and each applies at least one limiting condition. For individual IP

packets to pass the filter all conditions must be fulfilled.

NOTE: This function is not available when in bridge mode. Instead of IP Filtering,

MAC Filtering (pg. 45) performs a similar function.

Outgoing IP Filter

The default setting for Outgoing traffic is ACCEPTED. Under this condition, all

outgoing IP packets that match the filter rules will be BLOCKED.

To add a filtering rule, click the Add button. The following screen will display.