User manual

44
6.3.3 DMZ Host
The device will forward IP packets that do not belong to any of the applications
configured in the Virtual Servers table, from the WAN to the DMZ host computer.
Enter the computer's IP address and click Apply to activate the DMZ host.
Clear the IP address field and click Apply to deactivate the DMZ host.
Select an Application
or
Custom Application
User should select the application from the list.
or
User can enter the name of their choice.
Trigger Port Start Enter the starting trigger port number (when you select
custom application). When an application is selected, the
port ranges are automatically configured.
Trigger Port End Enter the trigger port end number (for custom
application). When an application is selected, the port
ranges are automatically configured.
Trigger Protocol User can select from TCP, TCP/UDP, or UDP.
Open Port Start Enter the starting open port number (when you select
custom application). When an application is selected, the
port ranges are automatically configured.
Open Port End Enter the open port end number (for custom application).
When an application is selected, the port ranges are
automatically configured.
Open Protocol User can select from TCP, TCP/UDP, or UDP.