User manual

5.1 WAN

Select WAN from the Device Info submenu to display the configured PVC(s).

The column headings above are described in the table below.

Heading Description

VPI/VCI Shows the values of the ATM VPI/VCI

Con. ID Shows the connection ID

Category Shows the ATM service classes

Service Shows the name for WAN connection

Interface Shows connection interfaces

Protocol Shows the connection type, such as PPPoE, PPPoA, etc.

IGMP Shows the state of the IGMP function

QoS Shows if IGMP IP QoS is enabled or disabled

State Shows the connection state of the WAN connection

Status Lists the status of DSL link

IP Address Shows IP address for WAN interface