User manual

4.2.2 MAC Encapsulation Routing (MER)

Step 4: Select MAC Encapsulation Routing (MER) and enter information provided

to you by your ISP to configure the WAN IP settings. Click Next.

DHCP is enabled in MER mode when Obtain an IP address automatically is

chosen. Changing the default gateway or the DNS affects the whole system.

Configuring them with static values will disable the automatic assignment from

DHCP or other WAN connection. If you configure the static default gateway over this

PVC in MER mode, you must enter the IP address of the remote gateway in the Use

IP address field.

Step 5: This screen provides access to Network Address Translation (NAT), IGMP

Multicast, and WAN Service settings. Enable each service by selecting its

checkbox. When done, click Next to continue.