User manual

STEP 6: After entering your settings, click Next. The following screen appears.

The Device Setup screen allows the user to configure the LAN interface IP address,

subnet mask, and DHCP server. To enable DHCP, select Enable DHCP server and

enter starting and ending IP addresses and the leased time.

This setting configures the router to automatically assign IP, default gateway and

DNS server addresses to every PC on your LAN. Please be aware that the private

address range (e.g. 192.168.1.2 ~ 192.168.1.254) does not include the router’s

LAN interface IP address (e.g. 192.168.1.1 by default). Also, the Ethernet interface

and wireless LAN share the same subnet since they are bridged within the router.

To configure a second IP address for the LAN port, click the box shown below.