User manual

14
STEP 3: On this screen, you can choose the connection type and select the
appropriate encapsulation mode. The available options are shown.
 PPPoA- VC/MUX, LLC/ENCAPSULATION
 PPPoE- LLC/SNAP BRIDGING, VC/MUX
 MER- LLC/SNAP-BRIDGING, VC/MUX
 IPoA- LLC/SNAP-ROUTING, VC MUX
 Bridging- LLC/SNAP-BRIDGING, VC/MUX
You may also choose to Enable 802.1q (available in PPPoE, MER, and Bridge modes)
and enter the VLAN ID, as shown below.
Click Next to continue…
NOTE: The subsections that follow continue the ATM PVC setup procedure. Enter
the appropriate settings for your service. Choosing different connection
types will lead to a different sequence of setup screens.