User manual

Chapter 4 Quick Setup

After login, the Quick Setup screen will appear. It is the default screen when no

connections exist. It allows for the configuration of DSL and IP settings.

4.1 Auto Quick Setup

This function provides an automated process to quickly setup a WAN connection.

The device will auto-detect the best PVC profile available, provided that the ADSL

link is up. For manual setup, please go to 4.2 Manual Quick Setup.

STEP 1: Tick the DSL Auto-connect checkbox on the Quick Setup screen.

STEP 2: Click Next to start the setup process. Follow the onscreen prompts.

STEP 3: After setup is complete, the device will reboot with the following shown.

NOTE: After the device reboots, the Device Info screen should appear. If the

browser does not refresh automatically, close it and restart. You will need

to login again. If you encounter difficulty, be sure to check the IP

configuration (see section 3.2 IP Configuration).