User manual

STEP 3: On the dialog box that appears, select the radio button labeled “Use the

following IP address”. Enter an IP address in this format {192.168.1.x,

where x is any number greater than 2 and less than 254}. Enter the

subnet mask as 255.255.255.0. The screen should display as follows.

STEP 3: Enter the default gateway and DNS server settings as provided by your

ISP or enter 192.168.1.1, which is the default IP address of the CT-5365.

Click OK to submit these settings and thereby activate STATIC IP mode.

3.3 Login Procedure

Perform the following steps to login to the web user interface.

NOTE: The default settings can be found in 3.1 Default Settings.

STEP 1: Start the Internet browser and enter the default IP address for the device

in the Web address field. For example, if the default IP address is

192.168.1.1, type http://192.168.1.1.

NOTE: For local administration (i.e. LAN access), the PC running the browser

must be attached to the Ethernet, and not necessarily to the device. For

remote access (i.e. WAN), use the IP address shown on the Device Info -

WAN screen and login with remote username and password.