User manual

DHCP Mode

When the CT-5365 powers up, the DHCP server (on the device) will start

automatically. To obtain an IP address automatically, DHCP mode must be activated

within the Internet Protocol properties of the Local Area Connection on your

computer. To check the current IP configuration, do the following:

STEP 1: From the Network Connections window, open Local Area Connection and

click the Properties button. You may also access this screen by

double-clicking the Local Area Connection icon on your taskbar.

STEP 2: Select Internet Protocol (TCP/IP) and click the Properties button again.

DHCP mode is activated if the dialog box displays as shown below.

STATIC IP Mode

Using static IP configuration, your computer must have an IP address within the

same subnet as the CT-5365. Follow the steps below to configure your computer to

use the default subnet of 192.168.1.x.

STEP 1: From the Network Connections window, open Local Area Connection and

click the Properties button. You may also access this screen by

double-clicking the Local Area Connection icon on your taskbar.

STEP 2: Select Internet Protocol (TCP/IP) and click the Properties button again.