User`s manual

58
5.8 NAT
The NAT menu in the Advanced menu bar allows setting up the Static NAT Mapping
and Port Range Mapping.
5.8.1 Static NAT Mapping
Static NAT Mapping allows a pool of local IP addresses to share a public IP address.
It is a form of NAT that maps multiple Private IP addresses to a single Public IP
address. It allows several virtually addressed workstations to share a single global
address. PAT uses the TCP and UDP port numbers to map multiple virtual addresses
to a single global address.
Follow the steps below to configure the Static NAT Mapping:
STEP 1:
Click the Static Nat Mapping tab on the NAT menu.
STEP 2:
Click Add to add a new entry of the static Nat mapping. Fill out the
following fields and click Apply.
STEP 3:
The new entry will be listed in previous Static NAT Mapping list.