User`s manual

43
5.3 DHCP
The Dynamic Host Configuration Protocol (DHCP) provides a centralized approach to
allocating IP addresses. It allows IP addresses to be dynamically assigned on an as
needed basis, from a pool of addresses. The DHCP server is enabled by factory
default with the default IP address of the eth0 to be 192.168.1.1/24.
5.3.1 Enable DHCP Server
STEP 1: Click DHCP from the menu bar. There is a default DHCP entry on the
screen. The default settings are as follows.
STEP 2:
To enable the DHCP entry, chose the entry and click the Start button. A
Stop button will display on the screen as follows.