User`s manual

32
Key Type
Disabled, 64 bits, 128 bits. This parameter
determines the level of security. Disabled means no
security, 128 bits provides the highest security. This
parameter must match with the remote-clients.
Key Generation
Select Passphrase to enable automatic key
generation, or Manually to manually enter each key.
The manual key generation provides two forms, Hex
decimal and ASCII string. If Manually is chosen, also
configure the fields below.
Passphrase
Enter a Passphrase if you wish clients to require a
Passphrase to connect with the access point.
Key Format
There are two key formats, Hex decimal, and ASCII
string. Choose one of the formats for manual key
generation. When the key type is 64 bits, the key
space in Hex format is 10 bytes, and in ASCII string is
5 bytes. When the key type is 128 bits, the key space
in Hex format is 26 bytes, and in ASCII string is 13
bytes.
Key Select If you are using a manual key generation, select a Key
number from 0~3, and type the access password in the
chosen field.
Key 0~3 The access password could be hexadecimal format or
ASCII string code, which depends on the above Key
Format you have chosen. You can configure all the four
key passwords (0-3), but only the chosen key will take
effect. The password will be required to be set on any
wireless client that you wish to connect with your
access point.