User`s manual

4.4.4 PPPoA

ADD AN ENTRY

To set up PPPoA, click PPPoA, configure the common fields and the following fields.

Click the Add button to add the entry.

 User name and Password: used for remote customers to login upon dialup.

PPPoA is manually activated by entering startup commands from the page:

Advanced>Configure PPPoA.

 Authentication: Defines the authentication code: PAP, CHAP or BOTH. If the

authentication code is set to BOTH, the router will follow the authentication

settings (PAP, CHAP) of the remote DSLAM.

MODIFY AN ENTRY

To modify an entry, complete the following steps:

STEP 1: Select the entry from the Current ATM PVC List, at the bottom of the

WAN Setup page. The current values of the selected entry will display in the

upper section of the page.

STEP 2: Change the parameters.

STEP 3: Click Modify.

DELETE AN ENTRY

To delete an entry, Select it from the Current ATM PVC List, at the bottom of the

WAN Setup page, and click the Delete button.