User`s manual

Chapter 7 Diagnostics

The Diagnostics menu provides feedback on the connection status of the CT-5071T

and the ADSL link. The individual tests are listed below. If a test displays a fail

status, click Test at the bottom of this page to make sure the fail status is consistent.

If the test continues to fail, click Help and follow the troubleshooting procedures.

Note: The display will vary depending on which PVCs are configured.

Test Description

Ethernet Connection Pass: indicates that the Ethernet interface from your

computer is connected to the LAN port of your DSL Router. A

flashing or solid green LAN LED on the router also signifies

that an Ethernet connection is present and that this test is

successful.

Fail: Indicates that the DSL Router does not detect the

Ethernet interface on your computer.

USB connection

(Not available on this

device)

Pass: Indicates that the USB interface from your computer is

connected to the LAN port of your DSL router.

Down: Indicates that the DSL Router does not detect the

USB interface on your computer.

ADSL Pass: Indicates that the DSL modem has detected a DSL