User`s manual

6.8 DSL
To access the DSL settings, first click On Advanced Setup and then click on DSL.
The DSL Settings dialog box allows you to select an appropriate modulation mode.
Option Description
G.dmt Enabled Sets G.Dmt if you want the system to use G.Dmt mode.
G.Lite Enabled Sets G.Lite if you want the system to use G.Lite mode.
T1.413 Enabled Sets the T1.413 if you want the system to use only T1.413
mode.
ADSL2 Enabled The device can support the functions of the ADSL2.
AnnexL Enabled The device can support/enhance the long loop test.
ADSL2+ Enabled The device can support the functions of the ADSL2+.
AnnexM Enabled Covers a higher “upstream” data rate version, by making use of
some of the downstream channels.
Inner Pair Reserved only
Outer Pair Reserved only
Bitswap Enable Allows bitswaping function.
SRA Enable Allows seamless rate adaptation.
71