User`s manual

5. Upon completion, click Next. The following screen appears.

The Device Setup page allows the user to configure the LAN interface IP address and

DHCP server. If the user would like this ADSL router to assign dynamic IP

addresses, DNS server and default gateway to other LAN devices, select the radio

box Enable DHCP server on the LAN to enter the starting IP address and end IP

address and DHCP lease time. This configures the router to automatically assign IP

addresses, default gateway address and DNS server addresses to each of your PCs.

Note that the router’s default IP address is 192.168.1.1 and the default private

address range provided by the ISP server in the router is 192.168.1.2 through

192.168.1.254.

6. After entering your settings, select Next to display the following screen. The

WAN Setup-Summary screen presents the entire configuration summary. Click

Save/Reboot if the settings are correct. Click Back if you wish to modify the

settings.

The following screen will be displayed.